Product description
Wefomey High Density COB LED Strip Lights, A NEW Choice to Light up Your High-end Life!
This is a professional strip light without gaps between the LEDs with allows for an over all desirable effect and high light levels with a balanced illumination.
2700K-6500K CCT Tunable COB LED Strip Light allows you to adjust the color temperature between 2700K and 6500K, no longer worry about only one color temperature!
All in one kit, power supply, remote control, controller, connector and COB LED strip.
You can set the color temperature and brightness you want according to the needs of the scene. Perfect to use as room light, living room light, bedroom light, tv light, closet light, kitchen light, under cabinet light, led desk light, under counter light, shelf light, led light for display case and more.
Operating Voltage DC24V Measured Power Max. 20W/M (Measured with two channels) Length 32.8ft/10m Width 8mm(0.315in) CRI 90+ Number of LED 6080 LEDs (608 LEDs/m) Color Temperature 2700K-6500K CCT Tunable White Luminous Flux 100-120 Lumen/w Cutting Unit 1.65in/42mm Waterproof Level IP20 Non-waterproof UL Listed Yes Type of Strip COB(chip on board) Type of Strip COB(chip on board) Control Method RF remote control; APP control Power Supply DC24V 2A/48W Power Supply(Included) Package 1 × 32.8FT CCT COB LED strip light; 1 × RF remote; 1 × Control box; 1 × 24V 48W power supply; 3 × 2Pin 8mm COB led strip connectors; 1 × COB connector extension wire; 6 × Mounting brackets and screws; 1 × User manual
Smart APP Control by Phone：
Download APP”LotusLamp X”( Google Play and iOS App Store)
Make sure your is Bluetooth enabled.Then strip lights automatically connect to the APP. If the led light strip is not displayed on the APP, it means that it is not connected, you can close the APP and re-open it to see if it is displayed; if it is not displayed, turn off the phone and re-start it and perform the above 2-3 steps again .(turn on Blutooth-open the app-see if it shows).
APP Group Management:
When you want to control several light bars at the same time through the APP, you need to create several groups to control them separately, such as (bedroom / living room / kitchen, etc.), They work at the same time or seperate , It’s simple and funny.
Timer switch function:
Convenience and Automation: Our timer switch function allows you to automate your lighting. This feature is both home and commercial use, ensuring that you never have to worry about manually controlling your lights again.
Package Dimensions : 7.52 x 7.44 x 2.4 inches; 1.17 Pounds
Item model number : WF-TWCOB-10M
Date First Available : November 20, 2025
Manufacturer : Dong Guan Shi He Yu Technology Co., Ltd.
ASIN : B0FS1XNBW1
Customer Reviews: 3.4 3.4 out of 5 stars (4) var dpAcrHasRegisteredArcLinkClickAction; P.when(‘A’, ‘ready’).execute(function(A) { if (dpAcrHasRegisteredArcLinkClickAction !== true) { dpAcrHasRegisteredArcLinkClickAction = true; A.declarative( ‘acrLink-click-metrics’, ‘click’, { “allowLinkDefault”: true }, function (event) { if (window.ue) { ue.count(“acrLinkClickCount”, (ue.count(“acrLinkClickCount”) || 0) + 1); } } ); } }); P.when(‘A’, ‘cf’).execute(function(A) { A.declarative(‘acrStarsLink-click-metrics’, ‘click’, { “allowLinkDefault” : true }, function(event){ if(window.ue) { ue.count(“acrStarsLinkWithPopoverClickCount”, (ue.count(“acrStarsLinkWithPopoverClickCount”) || 0) + 1); } }); });
Ultra Bright No Dark Spot: Wefomey 32.8ft COB Lights built-in 6080 LEDs (608 LEDs/m) can delivers more brightness and continuous linear light. CRI>90 colors are rich and the restoration is strong. Compared with traditional SMD LED strips, more brighter, softer, spotless, and more uniform light.
Easy Operate: With APP (LotusLamp X), You can choose from warm to cool white(2700K-6500K), 0 to 100% adjust brightness, timer function and group control. You can also adjust the color temperature and brightness through RF remote and controller. And has a power-on memory function, which can keep your last lighting mode and help you remember the light color and brightness.
Easy to DIY: Flexible and cuttable COB light strip can be bent at any angle and thus adapt to your devices to a large extent. The cutting functions give you great flexibility to achieve the length and shape you want. The middle of the metal point on the strip light is a cutting mark (one cutting unit every 42mm/16.5 inches), and the cut strip light can also be reconnected, which is very convenient for DIY!
Easy Installation & Widely Use: Very Simple installation. Just connect the parts and install to where you want. Flexible COB light strip with strong adhesive tape makes it easy to stick on clean, dry surface, also you can install it with screws (included). LED light strip and the width is 8mm, allowing you to fit it into very tight places! Ideal for use as kitchen lights, cabinet lights, shelf lights, display lights, stair lights, mirror lights, kitchen decor, etc.
All in One Kit: Includes 32.8FT CCT COB LED strip light, RF remote control, controller, UL Listed 24V 48W DC power supply, 2Pin 8mm COB led strip connectors, mounting brackets. You don’t need to spend extra time and money buying other accessories.
Tips: 1.The red & black wire at the end of the strip is convenient for you to connect the DC connector so that you can power at both ends when you add longer strips in the kit! 2.The 48W power supply in the kit is just enough for the strip light in the kit use. You must replace it with a higher output 24V power supply if the total length of the strip light exceeds 32.8ft.
Belle –
Set the mood with DIY lighting
This is a nice kit for a decent price. It provides a lot of light. It can be dimmed or brightened. I do wish it could be dimmed more though. Just by a little bit. You also have the color temperature choices. All is easy to control on app or remote.I initially wanted the under my cabinets in the kitchen, but since there it a break above my sink, I would not like the look of the light being exposed until the next cabinet. So I am placing these behind the bed. Using the tape alone was good, until day two when I noticed it getting loose. It will be secured more later. I was nervous cutting down to size, but it was ok. The kit has what you need: the 32.8FT LED strip light, the RF remote control, controller, plug, led strip connectors, and mounting brackets.The back lighting just sets a different mood. Lovely look.
Review 8672 –
Very Loud High Pitch Noise, Use With Another 24V 2A Power Adapter
These lights are bright and have a good warm-to-cool range. For $36.99, getting 32.8 ft of COB strip, a controller, and a 24V power supply is a pretty good deal. At this length, the 24V power keeps the brightness even from one end to the other. A 12V or 5V strip would definitely fade.The dimming is disappointing. Even at the lowest setting, they’re still much brighter than expected. The adhesive also doesn’t hold well once the strip heats up. If you want them to stay put, metal channels with lenses are the way to go.The Android app (Bluetooth only) is straightforward. It found the lights right away, and changing color, brightness, and schedules is easy.So why only 2 stars? The power supply has a high-pitched whine that you can hear through the house. I hear it in other reviews, and mine does the same thing. The lights themselves are good, but that noise is terrible.
Mike Patterson –
Wefomey COB LED Strip Light White
The COB design gives smooth, uniform light without visible dots, which looks much better than traditional LED strips. The color temperature range, from warm to cool white, is useful for switching between cozy evening vibes and bright work lighting.Setup was straightforward, and the adhesive stuck well to my clean wall surface. The remote works fine from across the room. I tried the app control, but it’s clunky and disconnects randomly from my phone, which became frustrating quickly. I mostly just use the remote now.My main issue is the dimming. It doesn’t go low enough for true ambient lighting at night; even the lowest setting is brighter than I’d like. The strip also gets warm after running for a few hours, not hot, but noticeably warm to the touch. Light quality is decent, and it’s UL-listed, which gave me some peace of mind. For the price, it does the job, but the app issues and limited dimming range keep it from being great.
Amazon Customer –
These are not for a teenage party. More of a rich Uncle vibe.
edit: i have to take a star away because the stickiness to hold the lights in place is worthless. The lights wont stay stuck on the wall for longer than 24 hours. I put them on a cleaned section of the wall too. In fact, I recently put up a vinyl wall mural in my room. they dont stay stuck to the cleaned portion of the wall NOR THE VINYL MURAL. the vinyl mural i’ve only had up for 2 days. i hung these lights the never next day, some portions on the wall, some on the vinyl..majority on the vinyl and it doens’t matter. the maker needs to upgrade their stick. i feel like taking 2 stars away because its so frustrating, but i guess 1 star for 1 failed oversight of quality assurance is acceptable.end of editI knew that these didn’t have any color LEDs, but for some reason, I was really sad when I was reminded of that. I feel like color would’ve just been such an awesome thing to have, but of course I didn’t take a start off for that, but I sure would’ve liked to have colorAnyway, if you check the video you’ll see they’re very bright. The remote works really well. It would be nice if they did some sort of flashing or stroke Bean or whatever but these are not those kind of lights. These are more of a classy ambience type of light. So make sure you curve your expectations. All in all for what these are they’re almost professional looking and I think they would be right at home in the most expensive mansion or a one bedroom apartment, which is what I have and I plan on putting them somewhere good… Maybe around my bed something like that. I recommend these LEDs.